Movable-bridle drone reeds · OR2-C2

Drag to rotate · scroll or pinch to zoom · right-drag to pan

An adjustable platform for making and voicing your own drone reeds. Print a body, then cut or print a matching tongue and adjust it by careful sanding. Use a stainless M5 grub screw; a separate tap is optional. This clearance revision keeps the OR2 tongue sizes and increases space before the socket. The model shows a 0.25 mm tongue opening; the supplied blanks are flat. Supply your own screws, O-rings and seating wrap; check their fit and airtightness as you assemble.

The complete set loads an approximately 82 MB compressed model. All 177 non-reed source meshes and transforms are preserved. Matching OR2-C2 model; non-reed geometry is retained.